Medica EasyLyte Na/K/Ca/pH Analyzer

Medica EasyLyte Na/K/Ca/pH Analyzer

Medica's EasyLyte analyzers are completely automated, microprocessor controlled electrolyte systems that use current ISE (Ion Selective Electrode) technology to make electrolyte measurements. The Medica EasyLyte Na/K/Ca/pH measures various combinations of sodium, potassium, calcium and pH in whole blood, serum, plasma, or urine.

Medica incorporates state-of-the-art electronics and innovative ergonomic design features.

EasyLyte analyzers combine easy Yes/No prompted operation, simple maintenance, and reliability into one economical design.

For sale to U.S. customers only

Features

• Extensive QC and Patient Data Storage: Convenient access and storage of quality control data. Patient histories are immediately accessible for re-evaluation.
• Modular Design: Extremely easy to maintain and repair, minimizing analyzer downtime.
• Modular Solution Pack: Handling of waste is eliminated, minimizing contact with biohazardous material. The 800 mL reagent pack provides the additional cost efficiency of up to 1330 tests per pack.
• Automatic Probe Wiping: Contact with patient sample is minimized, reducing exposure to biohazardous material. The frequency of probe occlusion is diminished and down time is reduced.

Specifications 

• Parameters:
  • Measures Na+, K+, Ca++, pH
  • Measures Ca++, pH at 37C + 0.1C
  • Ionized Calcium reported at sample pH
• Sample: Whole Blood, Serum or Plasma
• Sample Size: 100ml WholeBlood, Serum or Plasma
• Detection Range:
  • Blood:
    • Na+: 20-200mmol/L, K+:0.2-40mmol/L, Ca++: 0.1-6mmol/L, pH: 6.0-8.0 pH units
• Analysis Time: 60sec (Blood)
• Temperature of Measurement: 37C + 0.1C
• Analytes Calculated and Reported: Ca++ at pH = 7.4
• Data Storage: 125 patient results,Three levels of QC results
• Calibration: Automatic or On-Demand
• Resolution: Na+:0.10mmol/L, K+:0.01mmol/L, Ca++:0.01mmol/L ,pH:0.005pH units
• Reproducibility Typical within Run (n=20):
  • Blood,Serum,Plasma:
    • Na+: CV ≤1% (80-200mmol/L)
    • K+: CV≤2% (1-10mmol/L)
    • Ca++: SD ≤2% (0.4-1.5mmol/L)
    • pH: SD ≤ 1% (6.8-8.0pHunits)
• Output: 32 place alphanumeric display, 40 column printer, Serial port (RS-232)
• Ambient Conditions:15-32C (60-90F), ≤85% humidity
• Power: 100-115~VAC50/60Hz, 0.8A or 220~VAC50/60HZ, 0.4A
• Size and Weight: 9.5in.(24cm) Wx16.5in.(42cm) Hx8.0in.(20cm) D,13lbs.(5.8kg)
  
  

Specifications 

• Parameters:
  • Measures Na+, K+, Ca++, pH
  • Measures Ca++, pH at 37C + 0.1C
  • Ionized Calcium reported at sample pH
• Sample: Whole Blood, Serum or Plasma
• Sample Size: 100ml WholeBlood, Serum or Plasma
• Detection Range:
  • Blood:
    • Na+: 20-200mmol/L, K+:0.2-40mmol/L, Ca++: 0.1-6mmol/L, pH: 6.0-8.0 pH units
• Analysis Time: 60sec (Blood)
• Temperature of Measurement: 37C + 0.1C
• Analytes Calculated and Reported: Ca++ at pH = 7.4
• Data Storage: 125 patient results,Three levels of QC results
• Calibration: Automatic or On-Demand
• Resolution: Na+:0.10mmol/L, K+:0.01mmol/L, Ca++:0.01mmol/L ,pH:0.005pH units
• Reproducibility Typical within Run (n=20):
  • Blood,Serum,Plasma:
    • Na+: CV ≤1% (80-200mmol/L)
    • K+: CV≤2% (1-10mmol/L)
    • Ca++: SD ≤2% (0.4-1.5mmol/L)
    • pH: SD ≤ 1% (6.8-8.0pHunits)
• Output: 32 place alphanumeric display, 40 column printer, Serial port (RS-232)
• Ambient Conditions:15-32C (60-90F), ≤85% humidity
• Power: 100-115~VAC50/60Hz, 0.8A or 220~VAC50/60HZ, 0.4A
• Size and Weight: 9.5in.(24cm) Wx16.5in.(42cm) Hx8.0in.(20cm) D,13lbs.(5.8kg)